A comprehensive service provider integrating research, production and sales of tact switches, welcome to cooperate and consult!

language
中国
韩国
韩国
韩国
韩国
韩国
NEWS CENTER
NEWS CENTER
Your location:
Homepage
/
/
/
Structure of low profile tactile switch

Structure of low profile tactile switch

  • Categories:Tact switch
  • Author:
  • Origin:
  • Time of issue:2022-06-13
  • Views:223

(Summary description)The graphics are made on the film substrate, and the entire component is a switch function, so it is called a membrane switch. The low profile tactile switch is made of several layers of films of different materials and is bonded into a finished product.

Structure of low profile tactile switch

(Summary description)The graphics are made on the film substrate, and the entire component is a switch function, so it is called a membrane switch. The low profile tactile switch is made of several layers of films of different materials and is bonded into a finished product.

  • Categories:Tact switch
  • Author:
  • Origin:
  • Time of issue:2022-06-13
  • Views:223
Information

The graphics are made on the film substrate, and the entire component is a switch function, so it is called a membrane switch. The low profile tactile switch is made of several layers of films of different materials and is bonded into a finished product. Due to the short action stroke of this low profile tactile switch, it is only about 0.25~0.5MM, and the switch pressing force is 0.5~1N, which is more sensitive, and the switch is completed by light touch effect.

Wholesale low profile tactile switch

The panel layer is generally made of exquisite patterns and texts on the colorless light-transmitting sheet of less than 0.25MM, such as PET and PC. Because the main function of the panel layer of the low profile tactile switch is to play the role of identification and keys, so choose The material must have the characteristics of high transparency, high ink adhesion, high elasticity and high toughness.
The main function of the surface glue is to closely connect the panel layer and the circuit layer to achieve the effect of sealing and connection. This layer generally requires a thickness between 0.05-0.15MM, with high-strength viscosity and anti-aging properties; in production In general, special membrane switch double-sided adhesive is used. Some membrane switches require waterproof and high temperature resistance. Therefore, the surface adhesive must also use materials of different properties according to needs.
The use of adhesive is closely related to what material the low profile tactile switch is attached to. Common double-sided adhesives, 3M adhesives, waterproof adhesives, etc. are commonly used.

Keyword:

Scan the QR code to read on your phone

 ©Zhejiang Jianfu Electronics Co., Ltd  浙ICP备11035543号-1  Powred by 300.cn